Brown Products
Below are examples of just some of the Brown Products available.
The Bed Edger
(Click to play Video)
You've been asking for it and here it is. The TrenchMaster Model F-781H & F-991H BEDEDGER with the BEDMASTER rotor is the ultimate tool for defining beds or installing plastic or steel edging. The 8 HP Honda engine provides the power needed to trench in the hardest clays and the steerable rear wheels make the fancy curves and tree rings easy. The Model F-781H & F-991H BEDEDGER performs the same functions as our early model F-702, but the extra horsepower makes the tougher jobs easier.
The BEDEDGER is a light weight mini-trencher designed for ease of operation and maneuverability. Much more flexible than other mini-trenchers. By removing one nut and changing rotors you may grind small stumps, make standard trenches, prune roots, and much more. Cut across gravel and asphalt driveways.
F - 781H BEDEDGER |
|
|---|---|
Engine: |
8 HP Honda Industrial |
Weight: |
160 Lbs. |
Wheels: |
Steel With Pneumatic Tires |
Points: |
Tungsten Carbide |
Drive: |
Double Belt and Pully System |
Rate: |
10 To 30 Feet Per Minute (Depends On Soil Conditions) |
Depth: |
2 To 7 Inches, (depending on rotor choice). |
Width: |
1/2 To 9 Inches, (depending on rotor choice). |
Ship By: |
Motor Freight (Pre-Assembled) |
F - 991H BEDEDGER |
|
|---|---|
Engine: |
9 HP Honda Commercial |
Weight: |
165 Lbs. |
Wheels: |
Steel With Pneumatic Tires |
Points: |
Tungsten Carbide |
Drive: |
Double Belt and Pully System |
Rate: |
10 To 30 Feet Per Minute (Depends On Soil Conditions) |
Depth: |
2 to 9 inches |
Width: |
1/2 to 9 inches |
Ship By: |
Motor Freight (Pre-Assembled) |
The Trench Master
F
- 1202 TrenchMaster |
|
|---|---|
Engine: |
9 or 10 HP Commercial |
Weight: |
260 Pounds |
Wheels: |
Steel With Pneumatic Tires |
Points: |
Tungsten Carbide |
Drive: |
DoubleBelt and Pully System |
Rate: |
Up To 20 Feet Per Minute (Depends On Soil Conditions) |
Depth: |
3 To 12 Inches |
Width: |
1/2 To 3 Inches |
Ship By: |
Motor Freight (Pre-Assembled) |
F
- 703 TrenchMaster |
|
|---|---|
Engine: |
5 to 6 1/2 HP Heavy Duty Industrial |
Weight: |
130 Pounds |
Wheels: |
Steel With Pneumatic Tires |
Points: |
Tungsten Carbide |
Drive: |
Double Belt and Pully System |
Rate: |
Up To 25 Feet Per Minute (Depends On Soil Conditions) |
Depth: |
Up To 7 Inches |
Width: |
1/2 To 2 1/2 Inches |
Ship By: |
Motor Freight (Pre-Assembled) |
The
Edge Master
|
|
|---|---|
Engine: |
Honda or Briggs & Stratton |
Engine Size |
4 or 5.5 HP with oil alert |
Ignition System |
Transistor |
Top Governed Speed |
3900 RPM |
Valve System |
Overhead Valves |
Fuel Capacity |
3.88 Quarts |
Drive System |
Industrial Belt |
Construction |
Structural Speed |
Frame |
10 Guage Steel plate |
Clutch System |
Idler Pulley |
Dept Control |
Clutch Lever |
Blade Size |
Up to 10" |
Blade Guard |
Semi-enclosed |
Wheels |
9" Pneumatic |
Max. Curb Height |
10" |
Bearings |
1" Industrial |
Spindle |
1" (Hollow) |
Blade Mount |
1/2" Grade 8 Bolt |
Blade & Tool Holder |
3" Steel Tubing |
Dry Weight |
120 Pounds |
Martyn's Grass Lawns Ltd, Gort Na Leam, Dunmore, Co. Galway
Telephone (093) 38012/38037 Fax
(093) 38062
Email martyngrasslawns@eircom.net